Sunday, June 04, 2023

A new video is up for the 3d printer enclosure project.


I squared off the back and sanded the whole box down to prep for priming.  Between filiming the 1st and 2nd part I realized that I forgot to glue some of the joints and I went to remove a few panels.  I underestimated how well the MDF screws actually held the wood together and it started destroying the MDF in the area.  I decided that it would just be better to run a screw every inch instead of breaking all of the boards.  If you are building one of these you should be putting glue on every joint, the screws generally are only there to hold the shape while the glue hardens.