Thursday, December 12, 2019

We finished the write up on our rotary table so next will be some improvements and a full write up on our HID card scanner controller.

There will be some more updates on the 3d printer enclosure and some examples of what is other than a large box.  The next video will cover the first of the electronics being added to it, a temperature sensor, tri color LED strip, an arduino and a raspberry pi 3.  Currently I have a small mess of wires at my desk prototyping the controller for the tri color LED's that can run at 12/24v and how to push them from an arduino at 5v.

 

 

 

We will also have a video on how to set up OctoPrint on a raspberry pi 3 as it is not as simple to do on the older versions.